[State]
;
; defines the install location
;

TargetDir=C:\Cadence\SPB_16.3-silent

;
; Reboots if required at conclusion of installation
;

RebootIfReqd=N

;
;File Server Location
;

;FileServerLocationDir=G:\SPB_16.3

;
; identifies desired maintenance behavior
; possible values are: REMOVEALL, MODIFY, REPAIR
;

OnMaintenance=MODIFY

;
; If REMOVEALL is selected for maintenance, this flag
; determines if rollback (if applicable) should
; be performed
;

Rollback=Y


[Features]
;
; Identifies feature list that should be manipulated.
; If the features is not listed here it is NOT
; selected for installation. 
;

;Feature0=ALL OrCAD 163 Products
;Feature1=ALL OrCAD 163 Products\OrCAD_Capture_CIS
;Feature2=ALL OrCAD 163 Products\OrCAD_EE_Designer
;Feature3=ALL OrCAD 163 Products\OrCAD_FPGA_System_Planner
;Feature4=ALL OrCAD 163 Products\OrCAD_PCB_Designer
;Feature5=ALL OrCAD 163 Products\OrCAD_Signal_Explorer
;Feature6=ALL OrCAD 163 Products\PSpice
;Feature7=ALL SPB 163 Products
;Feature8=ALL SPB 163 Products\APD_APSI
;Feature9=ALL SPB 163 Products\Allegro_AMS_Simulator
;Feature10=ALL SPB 163 Products\Allegro_Design_Entry_CIS
;Feature11=ALL SPB 163 Products\Allegro_Design_Entry_HDL
;Feature12=ALL SPB 163 Products\Allegro_Editor_Router
;Feature13=ALL SPB 163 Products\Allegro_PCB_Librarian
;Feature14=ALL SPB 163 Products\Allegro_PCB_Router
;Feature15=ALL SPB 163 Products\Allegro_PCB_SI
;Feature16=ALL SPB 163 Products\Allegro_Physical_Viewer
;Feature17=ALL SPB 163 Products\Allegro_System_Architect
;Feature18=ALL SPB 163 Products\Digital_SiP
;Feature19=ALL SPB 163 Products\FPGA_System_Planner
;Feature20=ALL SPB 163 Products\RF_SiP
;Feature21=ALL Documentation

[Data]
;
; The data section stores any other properties required by
; the installation. This list varies based on product.
;

;
;The complete path and name of the control file to be used for installation
;It is a better idea to specify the Features to install in this INI file rather
;than use a control file. The installer can install from the control file OR
;from the features listed in this file. If features are specified in this file
;and a control file is also specified, the features specified in this file are ignored.
;
;ControlFile=C:\Cadence\ControlFiles\cf.txt
;

;
;The working Directory
;

WorkingDir=C:\SPB_Data-Silent

;
;File Associations Set to Y to override existing file associations at install time
;

OverwriteProductFileAssoc=N
OverwriteDragFileAccod=N

;
;SETTING LICENSE FILE
;
;Specifying the port and host information for the license server(s) sets the CDS_LIC_FILE environment variable used by Cadence applications to access the license server(s).
;
;You can get this information from the Cadence license file as follows:
;
; SERVER host1 83065c2 5280
;
;Where, host name = host1 port = 5280
;
;
;If you have multiple license servers and you want to access all of them, you can specify the port and host information for each of the license server 
;delimited by a semi-colon as follows: port1@host1;port1@host2;port1@host3 For example: 5280@sunny;5280@blue;5280@sky
;
;If your license server has a fault-tolerant server configuration, you can specify the port and host information for each server separated by a 
;comma as follows: port@host1,port@host2,port@host3 For example: 5280@sunny,5280@blue,5280@sky
;
;
;You can get the host and port information for a fault-tolerant server from the Cadence license file as follows,
;
; SERVER host1 83065c2 5280
;
; SERVER host2 83055b2 5280
;
; SERVER host3 82045c4 5280
;
;If you uncomment the following line, your CDS_LIC_FILE will be set to 5280@flexserver
;overwrite-lic-path=5280@flexserver
;
;If you uncomment the following line 5280@flexserver1 will be appended to current value of CDS_LIC_FILE variable.
;append-lic-path=5280@flexserver1